2017 Cleveland Rtx-3 Tour Satin Cb Wedge - 2 Dot Bounce Pick Your Loft 52 Review

Cleveland'southward 588 range of wedges started in 1988 and were the fifth model they created, hence the name. Since and so they have sold over 10 meg of them culminating in the Cleveland 588 RTX 2.0 wedge that has now been superseded by the Cleveland RTX-3.

A lot of the dimensions and features go on, merely alas the iconic 588 name has been dropped in favour of the RTX of recent models that stands for the Rotex Face.

The tertiary generation Rotex face features narrower and deeper Tour Cypher grooves that are the same dimensions on every loft and then they can fit an extra two on the face.

Cleveland say that the U shaped grooves have sharper edges because later on the grooves are cut, they make full them with plastic to protect them before the confront is sandblasted. In one case that is done the plastic is cleaned out and the groove is equally close to the legal limit as they can brand them.

The 4 laser milled lines are in that location equally earlier between the grooves for a fleck of extra grip and they will wearable downward over time. The lower lofts up to 52° have a direct milling pattern behind this and so college lofts from 54° upwardly are milled at an angle and so the pattern has more effect when the face is open.

Quite how they know that anybody opens upwardly every higher lofted wedge and by how much is beyond me, but the grip is nigh definitely there on every loft in the bag.

The range is the same as earlier going from 46° up to 64° with the same range of 1, ii and 3 dot bounces. Yet the grind has changed to what they are calling a V Sole Grind.

This is narrower than earlier for more than versatility and because it goes through the turf more easily.

Cleveland says that the V Sole loses 23% less speed through impact than the previous model.

On even the tightest lies I establish it going through the turf very hands and for most players the widest V-FG total grind volition be the one to become for in the higher lofts from 54° to threescore°.

There is a V-MG mid grind that is standard on the 46°, 48°, fifty°, 52°, 62° and 64° lofts and at this lower loft it provides all the bounciness you need.

The final option is the low bounce 5-LG grind that yous tin go in 54°, 56°, 58° and 60°, merely these low bounce wedges are actually only for highly skilled players equally there is less margin for mistake.

So there is a lot of new things going on with the RTX-3, but the main characteristic is one yous can't run across as information technology is to practise with the balance of the head.

With all bladed clubs, the Centre of Gravity (CG) is more than towards the heel of the club as most of the weight is in the hosel.

Cleveland has used what they telephone call Feel Balancing Technology to motility the CG on the RTX-three around 6mm closer to the eye of the face up than before in the 588 RTX ii.0.

They achieve this by making the hosel 1cm shorter to salvage 7g and so drill a micro cavity at the lesser of the hosel beneath where the shaft goes in to salvage another 2g.

This 9g is then repositioned in the back flange to move the CG further across the head, keeping it at the same height as the previous model. The closer you can striking the ball to the CG so the ameliorate the dispersion as the head will twist less at impact.

At the Cleveland RTX-3 launch I tested this out confronting the 588 RTX 2.0 on Trackman and RTX-iii was a lot ameliorate at getting consistent distances.

What the numbers also showed was a slightly lower launch angle and a higher level of spin of effectually 500-600rpm. Some of this could exist the brand new grooves on the RTX-3, but more probable information technology was considering the deeper grooves were channeling out more dirt and giving more grip. Either style the divergence was enough to persuade me that the new features were generating more overall spin.

The CG motility is a expert comeback and Cleveland say information technology was possible to move information technology fifty-fifty further, but that the sound and feel deteriorated when they did so. Patently they are working on new materials to make this happen so watch this space.

I thing I like most Cleveland wedges is that the heads are a overnice generous size without being likewise big.

The RTX-three shape is the aforementioned every bit before and in the lower lofts the depth of the confront on the inside does seem bigger than other models.

Throughout the range the feel was very skillful and whatever type of shot you wanted to play, information technology was easy to achieve. The V Sole Grind felt a lot more precise than the previous more than rounded blueprint and y'all did not have to open the face up much in social club to become a higher brawl flight.

The RTX-3 comes in a option of Tour Satin or Bout Black finished, with the latter supposed to last 4 times longer than other manufacturer darker finishes before it wear off showing the steel below.

Having managed to get some of it off in testing, it will probably but be a practise session and a couple of rounds before you kickoff to see a difference on the sole.

Keen tournament watchers will also spot a dark gold Tour Raw stop on Tour that may appear in shop in due course.

Overall the RTX-3 is a pregnant comeback on the 588 RTX 2.0 and it sounds and feels improve and the benefits of the CG placement should result in an increase in accuracy. It is probably the start of things to come up from Cleveland as more resources become into wedges now that they have stopped making irons and forest.

A competitive price combined with the versatility of the sole and i of the widest range of lofts and bounces ways that whatever your wedge needs in that location will be an RTX-three to hitting the spot.

holmeswiging.blogspot.com

Source: http://www.golfalot.com/equipment-reviews/cleveland-rtx-3-wedge-review-3637.aspx

Share this post